Crafted from recycled 55-gallon steel drums by village artisans in Haiti, these stunning pieces of art are truly one-of-a-kind! The process of turning sheets of metal into beautiful art is all done by hand. Steel drums used to transport oil into the capital of Haiti are cut, the oil is burned off to clean the metal, and then flattened in order to create stunning, upcycled art. Suitable for Indoor or Outdoor Use.
Crafted from recycled 55-gallon steel drums by village artisans in Haiti, these stunning pieces of art are truly one-of-a-kind! The process of turning sheets of metal into beautiful art is all done by hand. Steel drums used to transport oil into the capital of Haiti are cut, the oil is burned off to clean the metal, and then flattened in order to create stunning, upcycled art. Suitable for Indoor or Outdoor Use.
Crafted from recycled 55-gallon steel drums by village artisans in Haiti, these stunning pieces of art are truly one-of-a-kind! The process of turning sheets of metal into beautiful art is all done by hand. Steel drums used to transport oil into the capital of Haiti are cut, the oil is burned off to clean the metal, and then flattened in order to create stunning, upcycled art. Suitable for Indoor or Outdoor Use.
Crafted from recycled 55-gallon steel drums by village artisans in Haiti, these stunning pieces of art are truly one-of-a-kind! The process of turning sheets of metal into beautiful art is all done by hand. Steel drums used to transport oil into the capital of Haiti are cut, the oil is burned off to clean the metal, and then flattened in order to create stunning, upcycled art. Suitable for Indoor or Outdoor Use.
Crafted from recycled 55-gallon steel drums by village artisans in Haiti, these stunning pieces of art are truly one-of-a-kind! The process of turning sheets of metal into beautiful art is all done by hand. Steel drums used to transport oil into the capital of Haiti are cut, the oil is burned off to clean the metal, and then flattened in order to create stunning, upcycled art. Suitable for Indoor or Outdoor Use.
Crafted from recycled 55-gallon steel drums by village artisans in Haiti, these stunning pieces of art are truly one-of-a-kind! The process of turning sheets of metal into beautiful art is all done by hand. Steel drums used to transport oil into the capital of Haiti are cut, the oil is burned off to clean the metal, and then flattened in order to create stunning, upcycled art. Suitable for Indoor or Outdoor Use.
Made from recycled oil drums in Croix des Bouquets, Haiti,this wall hanging depicts a bouquet of flowers. Approximately 18 by 12 inches in size, this piece has a natural patina and can be hung indoors or out.
Meet the Artisans
When you visit Croix des Bouquets, the area of town known for Haitian metal art in the capital of Port-Au-Prince, you are met with a cacophony of tink, tink, tink as ball peen hammers strike sheets of steel. The sheets are cut from steel drums colored by oil and other liquids the drums at one time held. The process of turning sheets of metal into beautiful wall art is all done by hand, from cutting holes that become edges of trees and leaves, to accenting each lizard with a texture of scales, to painting or lacquering the final design. The artists are proud of their work, signing the pieces on the back side, leaving a raised, reversed signature on the front.
This 8-inch diameter flower and butterfly design is hand cut and embossed from steel oil drums in Haiti. The varnished piece is suitable for indoor or outdoor use.
Meet the Artisans
When you visit Croix des Bouquets, the area of town known for Haitian metal art in the capital of Port-Au-Prince, you are met with a cacophony of tink, tink, tink as ball peen hammers strike sheets of steel. The sheets are cut from steel drums colored by oil and other liquids the drums at one time held. The process of turning sheets of metal into beautiful wall art is all done by hand, from cutting holes that become edges of trees and leaves, to accenting each lizard with a texture of scales, to painting or lacquering the final design. The artists are proud of their work, signing the pieces on the back side, leaving a raised, reversed signature on the front.
Hang your keys on this helping hand - each finger forms a hook to hold them for you! This hand cut and embossed piece measures approximately 7 inches square, and has a metal hook on the back for hanging.
Meet the Artisans
When you visit Croix des Bouquets, the area of town known for Haitian metal art in the capital of Port-Au-Prince, you are met with a cacophony of tink, tink, tink as ball peen hammers strike sheets of steel. The sheets are cut from steel drums colored by oil and other liquids the drums at one time held. The process of turning sheets of metal into beautiful wall art is all done by hand, from cutting holes that become edges of trees and leaves, to accenting each lizard with a texture of scales, to painting or lacquering the final design. The artists are proud of their work, signing the pieces on the back side, leaving a raised, reversed signature on the front.
This Green Man mask design metal wall art features utensils with marbles as earrings and marble eyes. It is handmade from recycled steel drums in Haiti and signed by the artist Lurernier. Measures 24 by 18 inches. Suitable for indoor or outdoor hanging.
Meet the Artisans
When you visit Croix des Bouquets, the area of town known for Haitian metal art in the capital of Port-Au-Prince, you are met with a cacophony of tink, tink, tink as ball peen hammers strike sheets of steel. The sheets are cut from steel drums colored by oil and other liquids the drums at one time held. The process of turning sheets of metal into beautiful wall art is all done by hand, from cutting holes that become edges of trees and leaves, to accenting each lizard with a texture of scales, to painting or lacquering the final design. The artists are proud of their work, signing the pieces on the back side, leaving a raised, reversed signature on the front.
This tree decoration is handmade in Haiti from scrap steel drums. Light enough to hang well on a tree, this 4-inch by 2.5-inch ornament will keep Haiti in mind during the holiday season.
Meet the Artisans
When you visit Croix des Bouquets, the area of town known for Haitian metal art in the capital of Port-Au-Prince, you are met with a cacophony of tink, tink, tink as ball peen hammers strike sheets of steel. The sheets are cut from steel drums colored by oil and other liquids the drums at one time held. The process of turning sheets of metal into beautiful wall art is all done by hand, from cutting holes that become edges of trees and leaves, to accenting each lizard with a texture of scales, to painting or lacquering the final design. The artists are proud of their work, signing the pieces on the back side, leaving a raised, reversed signature on the front.
This piece features a flock of birds in this traditional Haitian design. Hand cut and embossed, this piece is 23 inches in diameter.
Meet the Artisans
When you visit Croix des Bouquets, the area of town known for Haitian metal art in the capital of Port-Au-Prince, you are met with a cacophony of tink, tink, tink as ball peen hammers strike sheets of steel. The sheets are cut from steel drums colored by oil and other liquids the drums at one time held. The process of turning sheets of metal into beautiful wall art is all done by hand, from cutting holes that become edges of trees and leaves, to accenting each lizard with a texture of scales, to painting or lacquering the final design. The artists are proud of their work, signing the pieces on the back side, leaving a raised, reversed signature on the front.
Crafted from recycled 55-gallon steel drums by village artisans in Haiti, these stunning pieces of art are truly one-of-a-kind! The process of turning sheets of metal into beautiful art is all done by hand. Steel drums used to transport oil into the capital of Haiti are cut, the oil is burned off to clean the metal, and then flattened in order to create stunning, upcycled art. Suitable for Indoor or Outdoor Use.
Crafted from recycled 55-gallon steel drums by village artisans in Haiti, these stunning pieces of art are truly one-of-a-kind! The process of turning sheets of metal into beautiful art is all done by hand. Steel drums used to transport oil into the capital of Haiti are cut, the oil is burned off to clean the metal, and then flattened in order to create stunning, upcycled art. Suitable for Indoor or Outdoor Use.
Recycled oil drums are handcut and worked with textured details creating this small square tree of life. Handmade by Carlo Brutus, one of the metal artisans, in Croix des Bouquets, Haiti, featuring a Tree of Life measuring approximately 8 inches square.
Meet the Artisans
When you visit Croix des Bouquets, the area of town known for Haitian metal art in the capital of Port-Au-Prince, you are met with a cacophony of tink, tink, tink as ball peen hammers strike sheets of steel. The sheets are cut from steel drums colored by oil and other liquids the drums at one time held. The process of turning sheets of metal into beautiful wall art is all done by hand, from cutting holes that become edges of trees and leaves, to accenting each lizard with a texture of scales, to painting or lacquering the final design. The artists are proud of their work, signing the pieces on the back side, leaving a raised, reversed signature on the front.
These house numbers are handcut and embossed by artisans in Haiti. They are approx 4.5 inches square and have holes for screws. Screws are not supplied.
Meet the Artisans
When you visit Croix des Bouquets, the area of town known for Haitian metal art in the capital of Port-Au-Prince, you are met with a cacophony of tink, tink, tink as ball peen hammers strike sheets of steel. The sheets are cut from steel drums colored by oil and other liquids the drums at one time held. The process of turning sheets of metal into beautiful wall art is all done by hand, from cutting holes that become edges of trees and leaves, to accenting each lizard with a texture of scales, to painting or lacquering the final design. The artists are proud of their work, signing the pieces on the back side, leaving a raised, reversed signature on the front.
This piece of Haitian metal art is 8 by 10 by 3 inches in size. This colorful bird includes a mechanism for hanging. 100% handmade and painted.
Meet the Artisans
When you visit Croix des Bouquets, the area of town known for Haitian metal art in the capital of Port-Au-Prince, you are met with a cacophony of tink, tink, tink as ball peen hammers strike sheets of steel. The sheets are cut from steel drums colored by oil and other liquids the drums at one time held. The process of turning sheets of metal into beautiful wall art is all done by hand, from cutting holes that become edges of trees and leaves, to accenting each lizard with a texture of scales, to painting or lacquering the final design. The artists are proud of their work, signing the pieces on the back side, leaving a raised, reversed signature on the front.
Decorate any wall with a beautiful handmade wall hanging from Haiti. This stunning piece of decorative art shows a detailed school of fish. It is crafted of recycled oil drums. Wall hanging measures approximately 24 inches in diameter.
Meet the Artisans
When you visit Croix des Bouquets, the area of town known for Haitian metal art in the capital of Port-Au-Prince, you are met with a cacophony of tink, tink, tink as ball peen hammers strike sheets of steel. The sheets are cut from steel drums colored by oil and other liquids the drums at one time held. The process of turning sheets of metal into beautiful wall art is all done by hand, from cutting holes that become edges of trees and leaves, to accenting each lizard with a texture of scales, to painting or lacquering the final design. The artists are proud of their work, signing the pieces on the back side, leaving a raised, reversed signature on the front.
This intricate wall piece is made from recycled oil drums in Croix des Bouquets, Haiti. This design features an elephant and calf with three dimensional ears. Handcrafted and signed by Cajuste Winston with a 24 inch diameter and a natural patina with high gloss finish. Suitable for indoor or outdoor hanging.
Meet the Artisans
When you visit Croix des Bouquets, the area of town known for Haitian metal art in the capital of Port-Au-Prince, you are met with a cacophony of tink, tink, tink as ball peen hammers strike sheets of steel. The sheets are cut from steel drums colored by oil and other liquids the drums at one time held. The process of turning sheets of metal into beautiful wall art is all done by hand, from cutting holes that become edges of trees and leaves, to accenting each lizard with a texture of scales, to painting or lacquering the final design. The artists are proud of their work, signing the pieces on the back side, leaving a raised, reversed signature on the front.
This intricate wall piece made from recycled oil drums in Croix des Bouquets, Haiti, features a palm tree design handcrafted by Carlo Brutus. 24 inch diameter with a natural patina with high gloss finish. Suitable for indoor or outdoor hanging.
Meet the Artisans
When you visit Croix des Bouquets, the area of town known for Haitian metal art in the capital of Port-Au-Prince, you are met with a cacophony of tink, tink, tink as ball peen hammers strike sheets of steel. The sheets are cut from steel drums colored by oil and other liquids the drums at one time held. The process of turning sheets of metal into beautiful wall art is all done by hand, from cutting holes that become edges of trees and leaves, to accenting each lizard with a texture of scales, to painting or lacquering the final design. The artists are proud of their work, signing the pieces on the back side, leaving a raised, reversed signature on the front.
This intricate wall piece made from recycled oil drums in Croix des Bouquets, Haiti features elephants in a semi circle design handcrafted by Carlo Brutus. 32 inches by 18 inches with a natural patina with high gloss finish.Suitable for indoor or outdoor hanging.
Meet the Artisans
When you visit Croix des Bouquets, the area of town known for Haitian metal art in the capital of Port-Au-Prince, you are met with a cacophony of tink, tink, tink as ball peen hammers strike sheets of steel. The sheets are cut from steel drums colored by oil and other liquids the drums at one time held. The process of turning sheets of metal into beautiful wall art is all done by hand, from cutting holes that become edges of trees and leaves, to accenting each lizard with a texture of scales, to painting or lacquering the final design. The artists are proud of their work, signing the pieces on the back side, leaving a raised, reversed signature on the front.
This intricate wall piece made from recycled oil drums in Croix des Bouquets, Haiti. The River Semi Circle design is handcrafted by Carlo Brutus, measuring 32 inches by 18 inches with a natural patina with high gloss finish. Suitable for indoor or outdoor hanging.
Meet the Artisans
When you visit Croix des Bouquets, the area of town known for Haitian metal art in the capital of Port-Au-Prince, you are met with a cacophony of tink, tink, tink as ball peen hammers strike sheets of steel. The sheets are cut from steel drums colored by oil and other liquids the drums at one time held. The process of turning sheets of metal into beautiful wall art is all done by hand, from cutting holes that become edges of trees and leaves, to accenting each lizard with a texture of scales, to painting or lacquering the final design. The artists are proud of their work, signing the pieces on the back side, leaving a raised, reversed signature on the front.
These intricate wall pieces are made from recycled oil drums in Croix des Bouquets, Haiti. This piece is made by Carlos Brutus, one of the metal artisans. It is 24" in diameter.
Meet the Artisans
When you visit Croix des Bouquets, the area of town known for Haitian metal art in the capital of Port-Au-Prince, you are met with a cacophony of tink, tink, tink as ball peen hammers strike sheets of steel. The sheets are cut from steel drums colored by oil and other liquids the drums at one time held. The process of turning sheets of metal into beautiful wall art is all done by hand, from cutting holes that become edges of trees and leaves, to accenting each lizard with a texture of scales, to painting or lacquering the final design. The artists are proud of their work, signing the pieces on the back side, leaving a raised, reversed signature on the front.
Hand cut and embossed from metal oil drums, this 24-inch diameter traditional Haitian metalwork features a double tree of life with parrots. The natural patina and lacquer coating makes this piece perfect for hanging indoors or out.
Meet the Artisans
When you visit Croix des Bouquets, the area of town known for Haitian metal art in the capital of Port-Au-Prince, you are met with a cacophony of tink, tink, tink as ball peen hammers strike sheets of steel. The sheets are cut from steel drums colored by oil and other liquids the drums at one time held. The process of turning sheets of metal into beautiful wall art is all done by hand, from cutting holes that become edges of trees and leaves, to accenting each lizard with a texture of scales, to painting or lacquering the final design. The artists are proud of their work, signing the pieces on the back side, leaving a raised, reversed signature on the front.
Crafted from recycled 55-gallon steel drums by village artisans in Haiti, these stunning pieces of art are truly one-of-a-kind! The process of turning sheets of metal into beautiful art is all done by hand. Steel drums used to transport oil into the capital of Haiti are cut, the oil is burned off to clean the metal, and then flattened in order to create stunning, upcycled art. Suitable for Indoor or Outdoor Use.
Depicting four lizards, this piece of metalwork, handcut and embossed from recycled oil drums in Croix des Bouquets, Haiti, has a natural patina of the oiled metal. It is 24 inches in diameter. Suitable for indoor or outdoor use.
Meet the Artisans
When you visit Croix des Bouquets, the area of town known for Haitian metal art in the capital of Port-Au-Prince, you are met with a cacophony of tink, tink, tink as ball peen hammers strike sheets of steel. The sheets are cut from steel drums colored by oil and other liquids the drums at one time held. The process of turning sheets of metal into beautiful wall art is all done by hand, from cutting holes that become edges of trees and leaves, to accenting each lizard with a texture of scales, to painting or lacquering the final design. The artists are proud of their work, signing the pieces on the back side, leaving a raised, reversed signature on the front.
Handcrafted from steel oil drums, this piece features an inspirational message. It is 16 * 12 inches. Suitable for indoor or outdoor use.
Meet the Artisans
When you visit Croix des Bouquets, the area of town known for Haitian metal art in the capital of Port-Au-Prince, you are met with a cacophony of tink, tink, tink as ball peen hammers strike sheets of steel. The sheets are cut from steel drums colored by oil and other liquids the drums at one time held. The process of turning sheets of metal into beautiful wall art is all done by hand, from cutting holes that become edges of trees and leaves, to accenting each lizard with a texture of scales, to painting or lacquering the final design. The artists are proud of their work, signing the pieces on the back side, leaving a raised, reversed signature on the front.
Handcrafted from steel oil drums, this piece features an inspirational message. It is 17 * 16 inches. Suitable for indoor or outdoor use.
Meet the Artisans
When you visit Croix des Bouquets, the area of town known for Haitian metal art in the capital of Port-Au-Prince, you are met with a cacophony of tink, tink, tink as ball peen hammers strike sheets of steel. The sheets are cut from steel drums colored by oil and other liquids the drums at one time held. The process of turning sheets of metal into beautiful wall art is all done by hand, from cutting holes that become edges of trees and leaves, to accenting each lizard with a texture of scales, to painting or lacquering the final design. The artists are proud of their work, signing the pieces on the back side, leaving a raised, reversed signature on the front.
Handcrafted from steel oil drums, this piece features an inspirational message. It is 11.5 * 10.5 inches. Suitable for indoor or outdoor use.
Meet the Artisans
When you visit Croix des Bouquets, the area of town known for Haitian metal art in the capital of Port-Au-Prince, you are met with a cacophony of tink, tink, tink as ball peen hammers strike sheets of steel. The sheets are cut from steel drums colored by oil and other liquids the drums at one time held. The process of turning sheets of metal into beautiful wall art is all done by hand, from cutting holes that become edges of trees and leaves, to accenting each lizard with a texture of scales, to painting or lacquering the final design. The artists are proud of their work, signing the pieces on the back side, leaving a raised, reversed signature on the front.
Handcrafted from steel oil drums, this piece features an inspirational message. It is 17 * 14 inches. Suitable for indoor or outdoor use.
Meet the Artisans
When you visit Croix des Bouquets, the area of town known for Haitian metal art in the capital of Port-Au-Prince, you are met with a cacophony of tink, tink, tink as ball peen hammers strike sheets of steel. The sheets are cut from steel drums colored by oil and other liquids the drums at one time held. The process of turning sheets of metal into beautiful wall art is all done by hand, from cutting holes that become edges of trees and leaves, to accenting each lizard with a texture of scales, to painting or lacquering the final design. The artists are proud of their work, signing the pieces on the back side, leaving a raised, reversed signature on the front.
Perfect for the musician or the musician wannabe, this painted Haitian metal wall art is cut, embossed, and painted by hand. This piece perfect for hanging indoors or out.
Meet the Artisans
When you visit Croix des Bouquets, the area of town known for Haitian metal art in the capital of Port-Au-Prince, you are met with a cacophony of tink, tink, tink as ball peen hammers strike sheets of steel. The sheets are cut from steel drums colored by oil and other liquids the drums at one time held. The process of turning sheets of metal into beautiful wall art is all done by hand, from cutting holes that become edges of trees and leaves, to accenting each lizard with a texture of scales, to painting or lacquering the final design. The artists are proud of their work, signing the pieces on the back side, leaving a raised, reversed signature on the front.
This tree decoration is handmade in Haiti from scrap steel drums and hand painted. They are light enough to hang well on a tree and keep Haiti in mind during the holiday period. The star is 5 inches tall and 5.5 inches wide.
This tree decoration is handmade in Haiti from scrap steel drums. They are light enough to hang well on a tree and keep Haiti in mind during the holiday period. The tree is 3.5 inches tall and 2 inches wide.
Crafted from recycled 55-gallon steel drums by village artisans in Haiti, these stunning pieces of art are truly one-of-a-kind! The process of turning sheets of metal into beautiful art is all done by hand. Steel drums used to transport oil into the capital of Haiti are cut, the oil is burned off to clean the metal, and then flattened in order to create stunning, upcycled art. Suitable for Indoor or Outdoor Use.
Crafted from recycled 55-gallon steel drums by village artisans in Haiti, these stunning pieces of art are truly one-of-a-kind! The process of turning sheets of metal into beautiful art is all done by hand. Steel drums used to transport oil into the capital of Haiti are cut, the oil is burned off to clean the metal, and then flattened in order to create stunning, upcycled art. Suitable for Indoor or Outdoor Use.
Crafted from recycled 55-gallon steel drums by village artisans in Haiti, these stunning pieces of art are truly one-of-a-kind! The process of turning sheets of metal into beautiful art is all done by hand. Steel drums used to transport oil into the capital of Haiti are cut, the oil is burned off to clean the metal, and then flattened in order to create stunning, upcycled art. Suitable for Indoor or Outdoor Use.
Crafted from recycled 55-gallon steel drums by village artisans in Haiti, these stunning pieces of art are truly one-of-a-kind! The process of turning sheets of metal into beautiful art is all done by hand. Steel drums used to transport oil into the capital of Haiti are cut, the oil is burned off to clean the metal, and then flattened in order to create stunning, upcycled art. Suitable for Indoor or Outdoor Use.
This 12-inch tall angel is handmade in Haiti from scrap steel drums. The piece is enhanced with an intricate Nativity scene woven into the angel design. Christmas tree topper or tabletop decoration (illuminate with a candle to further highlight the detail work). It measures approximately 12 x 9 inches.
Crafted from recycled 55-gallon steel drums by village artisans in Haiti, these stunning pieces of art are truly one-of-a-kind! The process of turning sheets of metal into beautiful art is all done by hand. Steel drums used to transport oil into the capital of Haiti are cut, the oil is burned off to clean the metal, and then flattened in order to create stunning, upcycled art. Suitable for Indoor or Outdoor Use.
Crafted from recycled 55-gallon steel drums by village artisans in Haiti, these stunning pieces of art are truly one-of-a-kind! The process of turning sheets of metal into beautiful art is all done by hand. Steel drums used to transport oil into the capital of Haiti are cut, the oil is burned off to clean the metal, and then flattened in order to create stunning, upcycled art. Suitable for Indoor or Outdoor Use.
Crafted from recycled 55-gallon steel drums by village artisans in Haiti, these stunning pieces of art are truly one-of-a-kind! The process of turning sheets of metal into beautiful art is all done by hand. Steel drums used to transport oil into the capital of Haiti are cut, the oil is burned off to clean the metal, and then flattened in order to create stunning, upcycled art. Suitable for Indoor or Outdoor Use.
Crafted from recycled 55-gallon steel drums by village artisans in Haiti, these stunning pieces of art are truly one-of-a-kind! The process of turning sheets of metal into beautiful art is all done by hand. Steel drums used to transport oil into the capital of Haiti are cut, the oil is burned off to clean the metal, and then flattened in order to create stunning, upcycled art. Suitable for Indoor or Outdoor Use.
Depicting a pair of dolphins in the ocean, this piece of metalwork, handcut and embossed from recycled oil drums in Croix des Bouquets, Haiti, has a natural patina of the oiled metal. It is 24 inches in diameter. Suitable for indoor or outdoor use.
Meet the Artisans
When you visit Croix des Bouquets, the area of town known for Haitian metal art in the capital of Port-Au-Prince, you are met with a cacophony of tink, tink, tink as ball peen hammers strike sheets of steel. The sheets are cut from steel drums colored by oil and other liquids the drums at one time held. The process of turning sheets of metal into beautiful wall art is all done by hand, from cutting holes that become edges of trees and leaves, to accenting each lizard with a texture of scales, to painting or lacquering the final design. The artists are proud of their work, signing the pieces on the back side, leaving a raised, reversed signature on the front.
This piece features hanging grapes in this traditional Haitian design. Hand cut and embossed, this piece is 23 inches in diameter.
Meet the Artisans
When you visit Croix des Bouquets, the area of town known for Haitian metal art in the capital of Port-Au-Prince, you are met with a cacophony of tink, tink, tink as ball peen hammers strike sheets of steel. The sheets are cut from steel drums colored by oil and other liquids the drums at one time held. The process of turning sheets of metal into beautiful wall art is all done by hand, from cutting holes that become edges of trees and leaves, to accenting each lizard with a texture of scales, to painting or lacquering the final design. The artists are proud of their work, signing the pieces on the back side, leaving a raised, reversed signature on the front.
Crafted from recycled 55-gallon steel drums by village artisans in Haiti, these stunning pieces of art are truly one-of-a-kind! The process of turning sheets of metal into beautiful art is all done by hand. Steel drums used to transport oil into the capital of Haiti are cut, the oil is burned off to clean the metal, and then flattened in order to create stunning, upcycled art. Suitable for Indoor or Outdoor Use.
This gecko is handmade in Haiti from recycled oil drums. Each has a small hook to hang the piece and is painted with a bright colorful design inspired by the local Haitian culture. From head to tail, the gecko is 8 inches long.
This gecko is handmade in Haiti from recycled oil drums. Each has a small hook to hang the piece and is painted with a bright colorful design inspired by the local Haitian culture. From head to tail, the gecko is 8 inches long.
When you visit Croix des Bouquets, the area of town known for Haitian metal art in the capital of Port-Au-Prince, you are met with a cacophony of tink, tink, tink as ball peen hammers strike sheets of steel. The sheets are cut from steel drums colored by oil and other liquids the drums at one time held. The process of turning sheets of metal into beautiful wall art is all done by hand, from cutting holes that become edges of trees and leaves, to accenting each lizard with a texture of scales, to painting or lacquering the final design. The artists are proud of their work, signing the pieces on the back side, leaving a raised, reversed signature on the front.
When you visit Croix des Bouquets, the area of town known for Haitian metal art in the capital of Port-Au-Prince, you are met with a cacophony of tink, tink, tink as ball peen hammers strike sheets of steel. The sheets are cut from steel drums colored by oil and other liquids the drums at one time held. The process of turning sheets of metal into beautiful wall art is all done by hand, from cutting holes that become edges of trees and leaves, to accenting each lizard with a texture of scales, to painting or lacquering the final design. The artists are proud of their work, signing the pieces on the back side, leaving a raised, reversed signature on the front.